JETSTREAM CASE STUDY
Learn how we implement our Jetstream system, which guarantees to prevent fuel contamination
Site Name: Undisclosed
Description of works:
Fuel Uplift, Manned Entry Tank Clean, Fuel Filtration and Installation of Jetstream
Tank Size: 3 different tanks, varying in size
Location: Outer London, UK
WHAT IS THE JOB:
This particular project was for a new client that we have started working with, they have previously been struggling with fuel contamination in their tanks.
They have experimented with several different methods to remove the contamination but nothing seemed to work. The client then got in contact with us and asked if we could help, of course we were happy to!
The stages of Implenting SDM Fuel Solutions Jetstream System:
STAGE 1
Carry out a Technical Survey. One of our experienced Technical Surveyors completed a Technical Fuel Survey on all of the tanks on site.
STAGE 2
After completing the Technical Fuel Survey, we analysed all the samples we gathered during our survey and input the data into a Fuel Analysis Report. Our results showed that 3/3 tanks on site contained contaminated fuel.
STAGE 3
We presented the Fuel Analysis Report back to the client and discussed the next steps. We suggested to the client that we would need to remove all the unrecoverable fuel, filter the recoverable fuel, clean the tanks and then install our innovative Jetstream System. We discussed the process, the timescale of the work, the benefits and the costing: they were happy to proceed.
STAGE 4
After our meeting with the client, we liaised with them via email and telephone calls and found a suitable date to complete the suggested works. Once we had found a date, we began preparation for the job.
STAGE 5
Once we arrived at site, we started by uplifting all of the fuel from each tank, separating the recoverable fuel from the unrecoverable. Once the contaminated fuel was uplifted and stored, our specialised engineers started on the Manned Entry Tank Clean.
STAGE 6
Once the tanks were thoroughly clean, we began the process of installing Jetstream.
STAGE 7
Once Jetstream was installed, we begun filtering the recoverable fuel back into the tank.
STAGE 8
Once the work was complete, we then liaised with the client to arrange quarterly visits to look over the system and check al was in working order. The client was super happy with the work we completed.
